The Postgraduate College

Technology / Wood Products Engineering

Overview

Degree awarded:

M.Phil

M.Phil/Ph.D

M.Sc

M.Sc (Wood Technology)

Ph.D

Professional Masters in Furniture and Interior Design (M.F.I. D)

Programmes:

Master of Science in Wood Products Engineering (Wood Composites)

Field of interest:

Biocomposite Engineering

Bioenergy Engineering

Biomaterials Processing and Utilisation

Furniture Design and Manufacturing

Not Applicable

Pulp and Paper

Pulp and Paper Engineering

Structural Design with Wood and Biomaterials

Wood Composites

Wood Energy and Environment

Wood Furniture Design and Manufacture

Wood Properties Processing and Utilization

Wood Structures

Entry requirements:

Regulations Governing Admission to Higher Degree Programmes

Candidates for admission to higher degree programmes shall normally be graduates of the University of Ibadan or other Universities/Institutions recognised by the Senate. Admission shall be made by the Postgraduate College on the recommendation of the appropriate Faculty Postgraduate Committee.
Candidates without any previous higher degrees in the relevant discipline may be admitted only to either the Degree of Master or the Professional Degree of Master.
Candidates with recognised “Research Higher” Degree in the relevant discipline may be admitted to the M.Phil or Ph.D. degree programmes as appropriate, on the recommendation of the appropriate Faculty Postgraduate Committee.
A candidate admitted to the degree of Master of University of Ibadan who obtained a weighted average mark of 55.0 – 59.9%, or a CGPA of between 4.0 and 4.9 may be offered provisional admission to the M.Phil./Ph.D programmes. Such candidates shall be assessed within three semesters of full time and four semesters of part time registration for the M.Phil/Ph.D to Ph.D conversion. This shall also apply to students who graduated from other universities

SPECIAL WAIVER FOR MATURED APPLICANTS

All University of Ibadan graduates should be admitted to Postgraduate programme with the ordinary level criteria existing at the time their first admission. Candidate who did not fulfill the requirements as at the time of their admission are not eligible for consideration.
Special consideration may be given to candidates, who obtained their first degree not less than 20 years from the time of seeking admission to any postgraduate programmes. Such candidates must have been found to possess special skills or abilities and professionally or academically engaged during the period of 20 years.

How to apply:

Apply online

Wood Production Engineering is a specialized field that focuses on the efficient and sustainable processing of wood materials into various products, ranging from lumber to furniture and beyond. This field combines engineering principles with a deep understanding of wood properties and manufacturing processes. Here's a general overview of the course content in Wood Production Engineering:

Wood Anatomy and Structure:

Students study the cellular structure of wood and how it affects its properties and behavior during processing.

Wood Physics and Mechanics:

Courses cover the physical and mechanical properties of wood, including density, strength, and moisture content.

Wood Chemistry:

Students learn about the chemical composition of wood and its interactions with various treatments and processes.

Sawmilling:

Courses cover the principles of sawing, cutting, and processing logs into lumber, veneer, and other wood products.

Drying and Moisture Control:

Students study the process of drying wood to control moisture content and prevent defects.

Wood Machining:

Courses focus on the machining of wood materials to create various shapes and profiles.

Adhesives and Joinery:

Students learn about different types of adhesives and methods for joining wood pieces to create strong and durable products.

Furniture Design:

Courses cover principles of designing functional and aesthetically pleasing wood furniture.

Product Development:

Students study the process of developing new wood products from concept to production.

Sustainable Design:

Courses focus on designing wood products with consideration for environmental impact and resource efficiency.

Computer-Aided Design (CAD):

Students learn to use CAD software for designing wood products and creating manufacturing plans.

CNC Machining:

Courses cover computer numerical control (CNC) machines used for precise wood cutting and shaping.

Process Optimization:

Students study methods to optimize production processes for efficiency and quality.

Wood Product Testing:

Courses cover testing methods to assess the quality, strength, and durability of wood products.

Inspection Techniques:

Students learn how to inspect wood products for defects and ensure adherence to quality standards.

Sustainable Wood Sourcing:

Courses focus on responsible sourcing of wood materials to ensure long-term environmental sustainability.

Life Cycle Assessment:

Students study the environmental impact of wood products from raw material extraction to disposal.

Few/Some of the Course Content

TIE 715	Ergonomics
TIE 711	Statistical Methods for Engineers
TWE 771	Seminar
TWE 750	Project
TWE 749	Wood Furniture Design and Manufacture
TWE 747	Applied Research Methods in Wood & Biomaterials Engineering
TWE 743	Wood Industry Management
TWE 741	Fluid Treatments of Wood & Fibrous Materials
TWE 740	Mechanical Behaviour of Wood & Biomaterials
TWE 739	Tropical Woods in Commerce
TWE 736	Wood Adhesives, Coatings and Fasteners
TWE 733	Advanced Structural Design with Wood & Biomaterials I
TWE 732	Ultra Structure and Properties
TWE 731	Wood Machinery and Systems Design
TWE 732	Wood Ultrastructure and Properties
TWE 731	Wood Machinery and Systems Design
TWE 733	Wood Structures
TWE 734	Wood and Fibre Composites
TWE 735	Pulp & Paper Technology I
TWE 736	Wood Adhesives, Coatings and Fasteners
TWE 737	Pulp & Paper Technology I
TWE 738	Design of Wood Structures

Entry Requirement

General Admission Requirements for Higher Degree

The basic qualification for admission to all Postgraduate Courses and Programmes is a first degree of the University of Ibadan or degree/Higher National Diploma of other recognized Institutions in the relevant discipline. Where qualifications are not strictly in the area of admission, remedial courses, which may lead to additional periods of studentship, may be prescribed.
In addition to individual Departmental requirements, applicants must satisfy the ‘O’ Level first degree matriculation requirements of the University of Ibadan i.e five ‘O’Level credit passes at ONE sitting or 6 ‘O’ level credits at TWO sittings including English Language and subject areas for ALL disciplines and Mathematics for ALL Science-based disciplines, Educational Management and Economics and at least a pass in Mathematics for other Social Science Courses OR Holder of NCE must have credit passes in WASC or credit or merit passes in TC II (obtained between 1967 and 1981) in English Language and four other relevant matriculation subjects.
Candidates for the degree of M.Phil and Ph.D. are admitted in the first instance to the Degree of Master Programme. However, candidates who, in addition to a good first degree, and already holding acceptable postgraduate degrees, may be considered for direct admission to the M.Phil and Ph.D. Programmes.

INTERNATIONAL STUDENT ADMISSION REQUIREMENT

Candidate with recognized first degree or higher degree assessed to be at least equal or equivalent to the degree of Bachelor or Master of the University of Ibadan and as recognized by the University senate may be admitted to the Masters , M.Phil, M.Phil/Ph.D or Ph.D Programme on the recommendation of the appropriate Faculty Postgraduate Committee
All applicants for the Postgraduate Diploma, Degree of Masters and Professional Master are require to take Test of Proficiency in English Language. A. minimum score of 40 percent must be attained before applicants could be eligible to be shortlisted by the admitting Departments, Schools, or Institutes.

Facilities

Career Path

Graduates of Wood Production Engineering programs have specialized knowledge in wood materials, manufacturing processes, and product development. They play a crucial role in the wood industry, ensuring efficient and sustainable production of wood products. Here are some common career paths for graduates:

Wood Product Engineer:

Graduates can work as engineers in wood product manufacturing companies, overseeing production processes and product quality.

Furniture Designer:

Many graduates specialize in designing wood furniture, considering both functionality and aesthetics.

Production Manager:

Graduates can manage production lines and manufacturing processes in wood product facilities.

Sawmill Manager:

Some graduates work in sawmills, overseeing log processing, lumber production, and quality control.

Product Development Specialist:

Graduates can focus on developing new wood products, from concept to production.

Quality Control Inspector:

Some graduates specialize in inspecting and testing wood products to ensure adherence to quality standards.

Wood Machining Technician:

Graduates can operate CNC machines and other equipment for wood machining.

Sustainable Design Consultant:

Some graduates work as consultants, advising companies on sustainable wood sourcing and environmentally friendly production practices.

Wood Science Researcher:

Graduates can conduct research on wood properties, processing techniques, and product innovations.

Sales and Marketing:

Some graduates work in sales and marketing roles for wood products, providing technical expertise to clients.

Environmental Compliance Officer:

Graduates can work to ensure that wood production processes adhere to environmental regulations.

Educational Roles:

Some graduates become educators, teaching wood technology and production processes at technical schools or colleges.

Wood Product Consultant:

Graduates can provide expertise to businesses and industries seeking to improve their wood production processes.

Wood Technology Analyst:

Some graduates work for research institutions or consulting firms analyzing trends and innovations in wood technology.

Independent Woodworking Business:

Graduates can start their own woodworking businesses, specializing in producing custom wood products.

Wood Production Engineering graduates contribute to the efficient and sustainable utilization of wood resources, creating products that are functional, aesthetically pleasing, and environmentally responsible. Their expertise is crucial for the woodworking industry and the continued advancement of wood technology.

Supervisor(s)

Fees

Get estimated fee for this programme using this Link

Apply now